Axle nut Sockets

SKU : 1291 - 22-Piece Axle Nut Display

- Axle nut sockets are designed for use with a torque wrench when servicing truck wheel bearing lock nuts - Includes: rack, header board and 22 axle nut sockets - 22 sockets included: 1201 -...

SKU : 1290 - 14-Piece Axle Nut Display

- Axle nut sockets are designed for use with a torque wrench when servicing truck wheel bearing lock nuts - Includes: rack, header board and 14 axle nut sockets - 14 sockets included: 1204 -...

SKU : 41670 - 7-Piece Axle Nut Socket Kit

- Seven of the most popular wheel bearing locknut sockets for late model Ford, Dodge and Toyota trucks. - Removes and installs hex nuts on trucks. - Kit includes: #1251 55mm Hex Locknut Socket. - Kit...

SKU : 3937 - 4-Lug 4WD Spindle Nut Socket 1/2-Ton Dana 50

- Remove and install 4-slot front axle nuts on 1981-97 Ford F250-350, Bronco with Dana Axle, or Dana 50IFS or model 60 monobeam axle outer adjusting nut; 1982-90 GM Heavy-duty 3/4- and 1-Ton trucks...

SKU : 3911 - Toyota Lock Nut Tool

- Services high-torque lock nuts on Toyota 4WD vehicles having free-wheel (lock-out) hubs; 1995-newer Tacoma; 1996-newer T100 and 4Runner. Dimensions: 1.625" X 2.75" X 2.75"

SKU : 3910 - 4WD Spindle Puller

- Removes front spindle to access needle bearing when lubricating and aligning front wheels. - 5/8"-18 fine thread permits use with slide hammer. - Fits spindle thread sizes 2"-16, 1-5/8"-16, and...

SKU : 3246 - 4WD Spindle Nut Wrench

- Remove and install 4-slot axle lock nuts.- For use on GM 3/4 and 1-Ton trucks; FOrd F-Series 1/2-Ton trucks with Dana 28, F250 and F350 4WD trucks. Dimensions: Diameter 2.625" x3.08" long

SKU : 3195 - 4-Lug with Extension 1/2-Ton Dana 80

- For high-shear rotating nuts on 1985-newer F250-350 with Dana 80 rear axle and 10-1/4" ring gear; 1987-newer E350 with Dana 80 rear axle and 10-1/4" ring gear; 1988-newer F Super-duty with Dana 80...

SKU : 2770 - 6-Lug 4WD Spindle Nut Socket 3/4-to 1-Ton Dana 44

- Remove and install 4-slot front axle lock nuts on 1978-84 Ford F-Series 4WD Heavy-duty 3/4- and 1-Ton trucks; 1973-81 GM 4WD 3/4- and 1-Ton trucks; 1984-92 Ranger, Bronco with manual hubs; 1990-93...

SKU : 2467 - 4-Lug 4WD Spindle Nut Socket 1/2- to 3/4-Ton Dana 44

- Remove and install 4-slot axle lock nuts on 1993-newer Ford Ranger, Bronco II, and Explorer with manual hubs; 1995-newer F-Series 1/2-, 3/4- and 1-Ton trucks and full-size Bronoco with manual hubs;...

SKU : 1262 - 100mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 4.438" X 4.438"

SKU : 1261 - 120mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.5" X 5.25" X 5.25"

SKU : 1260 - 110mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.781" X 4.813" X 4.813"

SKU : 1259 - 106mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.563" X 4.625" X 4.625"

SKU : 1258 - 94mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.875" X 4.125" X 4.125"

SKU : 1257 - 90mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 4" X 4"

SKU : 1256 - 82mm 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.5" X 3.75" X 3.75"

SKU : 1255 - 80mm 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 4.125" X 3.563" X 4"

SKU : 1254 - 71mm 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.188" X 3.563"

SKU : 1253 - 70mm 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.125" X 3.5"

SKU : 1252 - 60mm 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 2.75" X3.063"

SKU : 1251 - 55mm 6 Point Hex Lockout Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 1/2" square drive opening. - For front wheel adjusting nuts found on Toyota FJ, LN and RN models. Dimensions: 3...

SKU : 1250 - 4-1/2" 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 5" X 5"

SKU : 1245 - 2-3/4" 6 Point Rounded Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 1/2" square drive opening. - For 3/4- and 1-Ton Ford F250-350 trucks with automatic locking hubs. Dimensions: 3...

SKU : 1244 - 2-1/2" 6 Point Rounded Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 1/2" square drive opening. - For 1995-96 Ford F-150 trucks and full-sized Broncos with automatic locking hubs...

SKU : 1241 - 4-13/16" 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 5.313" X 5.313"

SKU : 1240 - 4-1/8" 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 4.625" X 4.625"

SKU : 1239 - 5-1/4" 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 5.688" X 6.438"

SKU : 1238 - 59mm 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.375" X 2.75" X 3"

SKU : 1237 - 2-3/4" 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.15" X 3.25" X 3.25"

SKU : 1236 - 2-3/8" 6 Point Rounded Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. - For 1990 and newer Ford Rangers, Bronco II and Explorers with automatic locking...

SKU : 1235 - 3-1/8" 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.563" X 3.563"

SKU : 1234 - 3-1/8" 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.563" X 4"

SKU : 1233 - 2-7/8" 8 Point Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.313" X 3.313"

SKU : 1232 - 2-7/8" 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.313" X 3.688"

SKU : 1231 - 3-3/4" 6 Point Hex Locknut Socket

- Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 4.188" X 4.688"