Specialty Tools

SKU : 41570 - Fan Clutch Wrench Service Kit

- Removes and installs the fan clutch on many models when repairing or replacing water pump, timing chain, or the fan clutch. - Kit includes: - #3900 Universal Pully Holder with pin set (5x8mm). - #3903 22mm Fan Clutch Wrench. - #3136-36 36mm Fan Clutch...

SKU : 9794 - Ten Spline Ratcheting Output Wrench

- Reversible offset ratcheting, chrome-plated, EZ Grip wrench contains a 1-1/8" drive to service a ten spline crankshaft. - Used for rotation of the crankshaft/check engine timing and parts clearance on Sportster® motorcycles. Dimensions: 1.875"...

SKU : 9793 - Six Spline Ratcheting Output Wrench

- Reversible offset ratcheting, chrome-plated, EZ Grip wrench contains a 1" drive to service a six spline crankshaft. - Used for rotation of the crankshaft/check engine timing and parts clearance on Sportster® motorcycles. Dimensions: 12" X 3" X...

SKU : 9724 - Oil Pressure Indicator Gauge Sending Unit Wrench

- Reversible ratcheting wrench used to remove/install the oil pressure indicator gauge sending unit on Harley-Davidson® FL Touring® motorcycles (1999 and up). - Special low profile. - Vinyl grip prevents the wrench from scratching or marring the...

SKU : 9723 - Oil Pressure Indicator Lamp Sending Unit Wrench

- Reversible ratcheting wrenches used to remove/install the oil pressure indicator lamp sending unit on Harley-Davidson® FL Touring® motorcycles (1999 and up). - Special low profile. - Vinyl grip prevents the wrench from scratching or marring the...

SKU : 9636 - Rear Axle 36mm Nut Ratchet Wrench

- Reversible ratcheting wrench used to install/remove 36mm axle nuts. - For use on FL Touring® models with 36mm axle nuts. - Insert a torque wrench into the built-in 1/2" square drive to get a torque reading.

SKU : 9280 - 24-tooth Crankshaft Wrench

- Used for rotation of the crankshaft on all 24-spline engines (2006 Harley-Davidson® Dyna®), and to check engine timing and parts clearance. - Custom design fits perfectly on the crankshafts of 2006 Dyna® models. - Heat-treated and...

SKU : 9270 - 6-tooth Crankshaft Wrench

- Used for rotation of the crankshaft on all 6-spline engines (2007 Harley-Davidson® Sportsters® and 2008 Buell®). - Extended wheel/socket to prevent wrench from sliding to far onto the crankshaft. - E-Z Grip handle allows more turning power...

SKU : 8799 - 17mm Engine Oil Drain Plug Wrench

- Reversible offset ratcheting wrench used to remove/install the engine oil drain plug on Metric V-Twin® motorcycles: Honda Shadows®, Yamaha V-Stars®, Kawasaki® Vulcan® and other metric motorcycles with 17mm engine and rear...

SKU : 8598 - 22mm x 24mm Front Axle Wrench

- Reversible ratcheting wrench used to remove/install the front axle shaft on motorcycles equipped with a female six-point socket in the end of the axle. - Used on various late models of Honda, Kawasaki, Suzuki and Yamaha. - Vinyl grip prevents the...

SKU : 8593 - Serpentine Belt Wrench for Heavy-Duty Trucks

- Used to release serpentine belt tensioners with 1/2" square drive openings. - 13" long, chrome-plated, reversible ratcheting wrench. - Provides more swing angle than a solid type serpentine belt wrench. - Compact overall length helps prevent handle...

SKU : 8592 - Ratcheting Serpentine Belt Wrench 15mm 6-pt. x 3/8" male square x 13mm x 14mm 6-pt.

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to access the tensioner from any angle...

SKU : 8591 - Ratcheting Serpentine Belt Wrench 14mm x 17mm 6-pt. x 19mm 6-pt. x 3/4" male square

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to access the tensioner f...

SKU : 8586 - Ratcheting Serpentine Belt Wrench 15mm 6-pt. x 3/8" male square x 16mm 6-pt. x 1/2" male square

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to - Heat-treated and nickel-chrome...

SKU : 8585 - Ratcheting Serpentine Belt Wrench 13mm x 14mm 6-pt. x 18mm 6-pt. x 1/2" male square

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to access the tensioner from any angle...

SKU : 8584 - 2-PC. Ratcheting Serpentine Belt Wrench Set

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to access the tensioner from any angle...

SKU : 8579 - Ratcheting Serpentine Belt Wrench 15mm 6-pt. x 3/8"male square x 16mm 6-pt.

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to access the tensioner from any angle...

SKU : 8577 - 17mm x 19mm Front Axle Wrench

- Reversible ratcheting wrench used to remove/install the front axle shaft on motorcycles equipped with a female six-point socket in the end of the axle. - Used on various late models of Honda, Kawasaki, Suzuki and Yamaha. - Vinyl grip prevents the...

SKU : 8569 - 9/16" Extra Long Automatic Slack Adjuster Wrench

- For brake service and slack adjuster installation on heavy-duty trucks equipped with Bendix®. - Extra deep hex allows reach to recessed adjusters. Dimensions: 17.875" X 4" X 1"

SKU : 7578 - 7/16" Automatic Slack Adjuster Wrench

- For brake adjustment on heavy-duty trucks equipped with Haldex slack adjusters. - Extra long handle provides comfort while overcoming the anti-reverse mechanism (22-25 lbs./ft.). Dimensions: 17.938" X 4" X 0.625"

SKU : 6738 - Magnetic Speedometer Sending Unit Wrench

- Extra long reversible offset ratcheting wrench used to remove/install magnetic speedometer sending units for Harley-Davidson® Sportster® motorcycles and other Harley-Davidson® applications with magnetic speedometer sending units. - Magnetic...

SKU : 6571 - 5/16" x 10mm Extra Long Battery Terminal Wrench

- Used to remove/install 5/16" side terminals. - Used to remove/install 10mm battery terminals and hold-down fasteners. - Socket allows for maximum hold on 10mm terminals and still allows room to access most 5/16" side terminals. - Extra length (9-3/4")...

SKU : 6562 - Rear Fender Bolt Wrench

- Extra long rocker box wrench used to remove/replace the bolt that holds the rear fender to the frame on Harley-Davidson® Touring® models, 1988 to present. - Remove the rear fender bolt without having to remove the tire. - Overall length = 13...

SKU : 6538 - Exhaust Bracket Wrench

- Reversible ratcheting wrench used to remove/install the front exhaust bracket on Harley-Davidson® Dyna® model Twin Cams® from 1999 to present. - 9-3/4" long with a removable/replaceable shortened T-27 TORX® bit. - Vinyl grip prevents...

SKU : 6532 - Cadillac Socket Head Drain Plug Wrench

- Single-end, extended 5/16” magnetic bit wrench to accommodate a T-45 TORX® bit (included). - Low profile design allows access to drain plug where a standard ratcheting wrench or TORX® driver will not. - For use on 2003-04 Cadillac 3.2L...

SKU : 6531 - Lower Rocker Box 7/16" Wrench for Evolution®

- Extra long reversible ratcheting box wrench used to install/remove the lower rocker box on Harley-Davidson® motorcycles with Evolution® engines (1994–1999). - Vinyl grip prevents the wrench from scratching or marring the bike. - 7/16"...

SKU : 6530 - Lower Rocker Box 7/16" Wrench for Twin Cam®

- Extra long reversible ratcheting box wrench used to install/remove the lower rocker box on Harley-Davidson® motorcycles with Twin Cam® engines (1999–2006). - Vinyl grip prevents the wrench from scratching or marring the bike. - 7/16"...

SKU : 6529 - Rocker Box Cover Ratcheting Bolt Wrench

- Reversible ratcheting box wrench used on all Harley-Davidson® Evolution® motor rocker box covers. - Low profile allows clearance between the frame and engine. - Long handle for increased reach.- Ergonomic rubber grip will not scratch - 9-3/4"...

SKU : 6525 - Extra Long 5/16" Ratcheting Side Terminal Battery Wrench

- Extra length (9-3/4") allows for better accessibility in reaching side terminals. - Insulated handle helps prevent electrical shock. - Reversible ratcheting box wrench allows for quick and effective terminal bolt removal. Dimensions: 16.125" X 4"...

SKU : 5541 - GM Multifunctional Switch Tool

- Conveniently remove/install the multifunction switch on GM vehicles - significantly reduces time. - Tool consists of a low profile 1/4" bit wrench with a T25 BALL TORX® Bit that allows better control and access in restricted areas. - Allows the...

SKU : 5530 - Intake Manifold Wrench

- Reversible ratcheting box wrench used on BigTwin® engines to install/remove intake manifold socket head cap screws. - 1/4" ball-end Allen bit. Dimensions: 9" X 3" X 0.625"

SKU : 5469 - Double-End Handle for Feeler Gauge Blades

- Color-coded handle makes using the correct blade fast and accurate, where light blue is for intake and red for exhaust - Even in dimly lit shops, the technician can be confident in using the correct blade without wasting time having to read the blades...

SKU : 5344 - 3-Pc. Universal Ratcheting Serpentine Belt Wrench Set

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to Dimensions: 18" X 5.5" X 1.5"

SKU : 5339 - 2-Pc. Ratcheting Serpentine Belt Wrench Set for Import Vehicles

- Releases the tension on spring-loaded idler pulleys. - Allows direct access to the tensioner without having to remove engine accessories or frame components. - Ratcheting feature allows quick and easy positioning to

SKU : 5333 - 9-Piece Fine Tooth Serpentine Belt Wrench Set

- Fine Tooth ratcheting action allows quick and easy positioning of wrench-driving end for tensioner access from any angle. - Used to service automotive serpentine belts equipped with spring-loaded tensioners. - Allows direct access to the tensioners...

SKU : 5238 - Master Power Steering Pulley Remover and Installer Set

- Designed to remove and install press-on-type belt-driven accessory pulleys found on most major domestic vehicle platforms. - Includes components necessary to use on pumps with the common 3/8"-16 threaded shaft. - Applications include: GM Quad 4, GM 3...