SKU : 3078 - Feeler Gauge Set, Jacobs Engine Brakes-Detroit Diesel MSRP: Was: Now: $74.52 Add to Cart
SKU : 5223 - 4mm Hex Key Bit Wrench Set - Used to connect and disconnect the wiring harness connection terminal to the ECM on CUMMINS engines. - Consists of a fine tooth bit wrench combined with a special 2-1/4" length, 4mm six-point key (1/4" six-point drive). - Fits the wiring harness... MSRP: Was: Now: $28.58 Add to Cart
SKU : 4663 - Spark Plug Extractor - Removes broken spark plugs from the cylinder head on Ford Triton 4.6L, 5.4L, and 6.8L 3-valve engines without removing the head. - Applications: - Ford Triton 4.6L V8 3-valve engine. - Ford Triton 6.8L V10 3-valve engine. - Ford Triton 5.4L V8 3-valve... MSRP: Was: Now: $117.36 Add to Cart
SKU : 4651 - Automatic Slack Adjuster Release Tool and Wrench - Used for adjusting automatic slack adjusters. - Fork-end tool to release the tensioner button, and a 5/16" double square offset reversible wrench with E-Z Grip handle. - Release the anti-reverse mechanism without prying. - Apply more turning power with... MSRP: Was: Now: $83.27 Add to Cart
SKU : 4647 - Harness Connector Release Tools - For disconnecting electrical connectors. - Specially designed, heat-treated blades with E-Z Grip handles. - Set includes one tool designed for pulling connectors off, and the other for pushing connectors off. - Easy connector removal... MSRP: Was: Now: $33.97 Add to Cart
SKU : 3937 - 4-Lug 4WD Spindle Nut Socket 1/2-Ton Dana 50 - Remove and install 4-slot front axle nuts on 1981-97 Ford F250-350, Bronco with Dana Axle, or Dana 50IFS or model 60 monobeam axle outer adjusting nut; 1982-90 GM Heavy-duty 3/4- and 1-Ton trucks. Dimensions: 11.5" X 4.375" X 1.563" MSRP: Was: Now: $55.47 Add to Cart
SKU : 3911 - Toyota Lock Nut Tool - Services high-torque lock nuts on Toyota 4WD vehicles having free-wheel (lock-out) hubs; 1995-newer Tacoma; 1996-newer T100 and 4Runner. Dimensions: 1.625" X 2.75" X 2.75" MSRP: Was: Now: $50.34 Add to Cart
SKU : 3910 - 4WD Spindle Puller - Removes front spindle to access needle bearing when lubricating and aligning front wheels. - 5/8"-18 fine thread permits use with slide hammer. - Fits spindle thread sizes 2"-16, 1-5/8"-16, and 38mm-1.5. - Applications: Full-size GM, Dimensions: 5... MSRP: Was: Now: $68.36 Add to Cart
SKU : 3509 - Steel Wheel Lock-Plate Remover/Installer - Features puller yoke to fit late model GM cars with (S.I.R.) air bags. - Narrow yoke prevents damage to the lock plate. - Hex screw supplied will lock down telescoping steering columns while removing lock plate. - Zinc and black oxide... MSRP: Was: Now: $36.85 Add to Cart
SKU : 3472 - Fan Clutch Wrench Set - Removes and installs the fan clutch on many models when repairing or replacing water pump, timing chain, or the fan clutch. - Set includes: - #3900 Universal Pulley Holder with pin set (5x8mm). - #3136-36 36mm Fan MSRP: Was: Now: $90.13 Add to Cart
SKU : 3414 - Serpentine Belt Wrench Set - Used to release tension on serpentine belt self-adjusting idler pulleys. - To use, place tool on self-adjusting idler pulley and push or pull to release tension. - Set includes: 3/8" drive bar for sockets and crowfoot wrenches. - Set includes: 1/2"... MSRP: Was: Now: $73.64 Add to Cart
SKU : 3350 - Injector Height Gauge for Detroit Diesel Engines - Applications: - Size: 78.2mm, Series: 60, Engine: DDEC I, Year: 1986-1993. - Size: 78.2mm, Series: 60 & 50, Engine: DDEC II, Year: 1986-1993. - Size: 78.8mm, Series: 60 & 50, Engine: DDEC III, Year: 1994- Dimensions: 7.875" X 4" X 0.75" MSRP: Was: Now: $122.67 Add to Cart
SKU : 3246 - 4WD Spindle Nut Wrench - Remove and install 4-slot axle lock nuts.- For use on GM 3/4 and 1-Ton trucks; FOrd F-Series 1/2-Ton trucks with Dana 28, F250 and F350 4WD trucks. Dimensions: Diameter 2.625" x3.08" long MSRP: Was: Now: $68.34 Add to Cart
SKU : 3195 - 4-Lug with Extension 1/2-Ton Dana 80 - For high-shear rotating nuts on 1985-newer F250-350 with Dana 80 rear axle and 10-1/4" ring gear; 1987-newer E350 with Dana 80 rear axle and 10-1/4" ring gear; 1988-newer F Super-duty with Dana 80 rear axle and 10-1/4" ring gear. Dimensions: 6" X... MSRP: Was: Now: $83.63 Add to Cart
SKU : 3136 - Ford Fan Clutch Wrench Set - Used to remove and replace the thermostatic fan assembly when repairing or replacing water pump, timing chain, or the fan clutch. - Set includes: #3136-36 36mm Fan Clutch Wrench - used to remove and replace the thermosta MSRP: Was: Now: $51.94 Add to Cart
SKU : 3078 - Feeler Gauge Set, Jacobs Engine Brakes-Detroit Diesel - Blade sizes and usage: 0.019" - 0.021" Series 60 model years 1999 and before; 0.022" - 0.024" Series 60 all model years, Series 50; 0.025" - 0.027" Series 60 all model years, Series 50; 0.031" - 0.033" Series 60 model year 2000 and after; 0.058" - 0 MSRP: Was: Now: $74.52 Add to Cart
SKU : 3075 - 23-Bld Feeler Gauge for Detroit Diesel Valve Adj. - Loose set of feeler gauge blades have a range of .008" to .030" to cover heavy-duty truck engine applications - 3" blade, with 1" long 30° offset, and 1/2" of 0.002" step - Used in the Feeler Gauge Set for Heavy-Duty Truck Valve Lash Adjustment... MSRP: Was: Now: $35.46 Add to Cart
SKU : 3074 - 23-Bld Feeler Gauge for Gen. H.D. Truck Valve Adj. - Loose set of feeler gauge blades have a range of .008" to .030" to cover heavy-duty truck engine applications - 3" blade, with 5/8" long 45° offset - Used in the Feeler Gauge Set for Heavy-Duty Truck Valve Lash Adjustment (part no. 3079) MSRP: Was: Now: $18.85 Add to Cart
SKU : 3072 - 23-Bld Feeler Gauge for Cummins Diesel Valve Adj. - Loose set of feeler gauge blades have a range of .008" to .030" to cover heavy-duty truck engine applications - 6" blade, with 1" long 90° offset - Used in the Feeler Gauge Set for Heavy-Duty Truck Valve Lash Adjustment (part no. 3079) MSRP: Was: Now: $60.58 Add to Cart
SKU : 2770 - 6-Lug 4WD Spindle Nut Socket 3/4-to 1-Ton Dana 44 - Remove and install 4-slot front axle lock nuts on 1978-84 Ford F-Series 4WD Heavy-duty 3/4- and 1-Ton trucks; 1973-81 GM 4WD 3/4- and 1-Ton trucks; 1984-92 Ranger, Bronco with manual hubs; 1990-93 Dodge trucks with Dana 44. Dimensions: 5.625" X 2... MSRP: Was: Now: $55.37 Add to Cart
SKU : 2467 - 4-Lug 4WD Spindle Nut Socket 1/2- to 3/4-Ton Dana 44 - Remove and install 4-slot axle lock nuts on 1993-newer Ford Ranger, Bronco II, and Explorer with manual hubs; 1995-newer F-Series 1/2-, 3/4- and 1-Ton trucks and full-size Bronoco with manual hubs; 1959-85 F-Series 1/2- and 3/4-Ton trucks and full -... MSRP: Was: Now: $59.34 Add to Cart
SKU : 1418 - Drain Plug Wrench - For drain plugs on differentials, transmissions (auto/manual), transfer cases, and engines. - Designed to fit the two most common female drain plug sizes: 3/8" and 1/2" square. - Add a socket to the wrench for use on male six-point drain... MSRP: Was: Now: $46.58 Add to Cart
SKU : 1410 - Tire Valve Installer - Simplify inserting any tubeless tire valve - Swivel head screws onto cap thread of tire valve - Handle is used as a lever to pull tire valve into rim hole Dimensions: 14" X 4" X 1" MSRP: Was: Now: $35.54 Add to Cart
SKU : 1262 - 100mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 4.438" X 4.438" MSRP: Was: Now: $50.31 Add to Cart
SKU : 1261 - 120mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.5" X 5.25" X 5.25" MSRP: Was: Now: $68.07 Add to Cart
SKU : 1260 - 110mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.781" X 4.813" X 4.813" MSRP: Was: Now: $62.22 Add to Cart
SKU : 1259 - 106mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.563" X 4.625" X 4.625" MSRP: Was: Now: $68.07 Add to Cart
SKU : 1258 - 94mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.875" X 4.125" X 4.125" MSRP: Was: Now: $64.22 Add to Cart
SKU : 1257 - 90mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 4" X 4" MSRP: Was: Now: $60.51 Add to Cart
SKU : 1256 - 82mm 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.5" X 3.75" X 3.75" MSRP: Was: Now: $57.97 Add to Cart
SKU : 1255 - 80mm 6 Point Hex Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 4.125" X 3.563" X 4" MSRP: Was: Now: $62.52 Add to Cart
SKU : 1254 - 71mm 6 Point Hex Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.188" X 3.563" MSRP: Was: Now: $62.52 Add to Cart
SKU : 1253 - 70mm 6 Point Hex Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 3.125" X 3.5" MSRP: Was: Now: $67.06 Add to Cart
SKU : 1252 - 60mm 6 Point Hex Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 2.75" X3.063" MSRP: Was: Now: $53.87 Add to Cart
SKU : 1251 - 55mm 6 Point Hex Lockout Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 1/2" square drive opening. - For front wheel adjusting nuts found on Toyota FJ, LN and RN models. Dimensions: 3.375" X 2.563" X 2.813" MSRP: Was: Now: $53.48 Add to Cart
SKU : 1250 - 4-1/2" 8 Point Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 3/4" square drive opening. Dimensions: 3.438" X 5" X 5" MSRP: Was: Now: $73.97 Add to Cart
SKU : 1245 - 2-3/4" 6 Point Rounded Hex Locknut Socket - Designed for use with a torque wrench when servicing truck wheel bearing locknuts. - 1/2" square drive opening. - For 3/4- and 1-Ton Ford F250-350 trucks with automatic locking hubs. Dimensions: 3.375" X 3.125" X 3.125" MSRP: Was: Now: $47.87 Add to Cart
