Specialty Tools

SKU : 754R - 14mm x 1.50 Threaded Wheel Stud Installer

- Assures correct installation of wheel studs. - No more ruined studs or lug nuts. Dimensions: 3" X 4" X 1.313"

SKU : 753R - 12mm x 1.75 Threaded Wheel Stud Installer

- Assures correct installation of wheel studs. - No more ruined studs or lug nuts. Dimensions: 3" X 4" X 1.313"

SKU : 752R - 9/16"-18 Threaded Wheel Stud Installer

- Assures correct installation of wheel studs. - No more ruined studs or lug nuts. Dimensions: 3" X 4" X 1.313"

SKU : 750R - 1" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 1.25"

SKU : 749R - 7/8" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 1.125"

SKU : 748R - 3/4" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 1"

SKU : 747R - 5/8" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.875"

SKU : 746R - 9/16" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.813"

SKU : 745R - 1/2" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.75"

SKU : 744R - 7/16" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.688"

SKU : 743R - 3/8" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.5"

SKU : 742R - 5/16" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.625"

SKU : 741R - 1/4" Gasket Hole Punch

- Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 6" X 0.5"

SKU : 740R - Long Driving Mandrel, with O-Ring

- Inserts into gasket hole punches for striking hole cuts and internal radii into gaskets and other soft material (i.e, rubber, lead foil, linoleum, felt fiber). Dimensions: 2" X 9" X 0.625"

SKU : 676-8 - 8mm Serrated Bit Wrench

- Hex size is 5/16". - Use to install and remove 12-point (triple-square) metric socket-head screws. - Turn with a socket or wrench. Dimensions: 5.688" X 3" X 0.313"

SKU : 676-6 - 6mm Serrated Bit Wrench

- Hex size is 5/16". - Use to install and remove 12-point (triple-square) metric socket-head screws. - Turn with a socket or wrench. Dimensions: 5.688" X 3" X 0.375"

SKU : 676-12 - 12mm Serrated Bit Wrench

- Hex size is 1/2". - Use to install and remove 12-point (triple-square) metric socket-head screws. - Turn with a socket or wrench. Dimensions: 5.688: X 3" X .5"

SKU : 676-10 - 10mm Serrated Bit Wrench

- Hex size is 1/2". - Use to install and remove 12-point (triple-square) metric socket-head screws. - Turn with a socket or wrench. Dimensions: 5.688" X 3" X 0.5"

SKU : 635A - Universal Oil Filter Wrench

- Designed to fit oil filters for all domestic and foreign compact, mid- and standard- sized automobiles. - Self-adjusting wrench will fit all filters 2-1/2" through 3-13/16" in diameter. - Works with a 3/8" square drive socket wrench.

SKU : 5529A - Ford Headlight Adjusting Ratcheting Wrench

- 4mm x 4.5mm wrench for adjusting headlights on late model Fords with aerodynamic designs and headlights with rear mounted adjusters. - 8" length, slim tool profile

SKU : 5248R - Pump/Pulley Removal Housing

- Removal Housing from Master Power Steering Pump/Alternator Pulley Remover & Installer Set.

SKU : 5246R - Pump/Pulley 5/8"-18 Nut

- 5/8"-18 Nut from Master Power Steering Pump/Alternator Pulley Remover & Installer Set. Dimensions: 3" X 4" X 0.625"

SKU : 5240R - Pump/Pulley Thrust Bearing

- Thrust Bearing from Master Power Steering Pump/Alternator Pulley Remover & Installer Set. Dimensions: 3" X 4" X 0.5"

SKU : 5219R - Pump/Pulley Threaded Shaft

- Threaded Shaft from Master Power Steering Pump/Alternator Pulley Remover & Installer Set. Dimensions: 2" X 6" X 0.875"  

SKU : 5216R - Pump/Pulley Holding Bar

- Holding Bar from Master Power Steering Pump/Alternator Pulley Remover & Installer Set. Dimensions: 2" X 9" X 0.5"

SKU : 5214R - Pump/Pulley Universal Removal Pin.

- Universal Removal Pin from Master Power Steering Pump/Alternator Pulley Remover & Installer Set. Dimensions: 2" X 9" X 0.5"

SKU : 5212R - Pump/Pulley Installer for Ford 4.6L.

- Pulley Installer from Master Power Steering Pump/Alternator Pulley Remover & Installer Set, for Ford 4.6L engine. Dimensions: 3" X 4" X 0.5"

SKU : 5211R - Pump/Pulley Installer for 3/8"-16 threaded shaft.

- Pulley Installer from Master Power Steering Pump/Alternator Pulley Remover & Installer Set, for pumps with common 3/8"-16 threaded shaft. Dimensions: 3" X 4" X 0.5"

SKU : 5210R - Pump/Pulley Installer for GM 3.1L.

- Pulley Installer from Master Power Steering Pump/Alternator Pulley Remover & Installer Set, for GM 3.1L engine. Dimensions: 2.75" X 0.625" X 0.563"

SKU : 5209R - Pump/Pulley Installer for GM Quad 4.

- Pulley Installer from Master Power Steering Pump/Alternator Pulley Remover & Installer Set, for GM Quad 4 engine. Dimensions: 3.875" X 0.563" X 0.5"

SKU : 5208R - Pump/Pulley Removal Pin for GM Quad 4.

- Removal Pin from Master Power Steering Pump/Alternator Pulley Remover & Installer Set, for GM Quad 4 engine. Dimensions: 3.938" X 0.313" X 0.313"

SKU : 5206R - Pump/Pulley Installer Nut

- Installer Nut from Master Power Steering Pump/Alternator Pulley Remover & Installer Set. Dimensions: 1.25" X 0.938" X 1.063"

SKU : 475A - Clutch Master Cylinder Pin Press

- Service the clutch master cylinder and hydraulic lines without having to remove the whole clutch master cylinder assembly. - Used to press out the roll pin that retains the hydraulic line to the clutch master cylinder or the clutch slave cylinder or...

SKU : 436A - Exhaust Hanger Removal Pliers

- For removal of rubber exhaust system hangers (i.e.; tailpipe, exhaust pipe and muffler). - Self-locating forcing pin. - Cushioned slip-resistant handles at a 25 degree offset for easy access in restricted areas.

SKU : 408A - Valve Stem Fishing Tool

- Used to pull valve stems and valve stem/inner tube assemblies through the valve stem hole on vehicle rims. - Tool has three functions: valve stem puller, valve core removal, and tire deflator. - Unlike existing tools on the market, this valve stem...

SKU : 380A - Brake Resetting Gauge

- Speeds up drum brake service. - Wide working range allows measurements from 6-1/2" to 13-1/4" in diameter. - Services foreign and domestic cars and light trucks with drum bakes. - Locks the measurement at the appropriate inch or metric calibration...